The construction of aluminum scaffolding can be operated according to the relevant construction design standards. If not specified, the height difference between the outdoor design elevation and the structural elevation of the roof surface of the building can be calculated according to the average, plus 1.5m comprehensive determination. The height of the aluminum scaffolding of the underground outdoor wall is from the design outdoor floor to the bottom of the floor cushion.
If the height of the same building is different, the height of the aluminum scaffolding needs to be calculated separately according to different heights. If the structural elevation along the outer edge of the outer wall of the building is intermittently changed, the height of the scaffolding can be calculated according to different heights; when continuously changing, the height of the aluminum scaffold is calculated according to the average elevation.
When the floor space of the roof stairwell and the equipment room is more than one-third of the flat area of the roof, the amount of aluminum scaffolding is integrated into the whole building, and the height is measured to the height of the roof stairwell and the roof of the equipment room; when the roof stairwell and equipment room When the plane area is less than one-third of the plane area of the roof, the amount of aluminum scaffolding is calculated separately according to its own height.
When the upper part of the actual building is retracted or the upper tower of the podium is retracted, the calculation of the erection area shall be calculated in stages when the aluminum scaffold is detached, but the height of the erection shall be calculated from the elevation of the outdoor floor. The skirt section of the 1.5m distance between the outer edge of the podium and the outer edge of the tower is calculated separately according to the regulations, and the height is counted to the podium.