Home > Industry > Content

Different calculation criteria for the amount of wheeled scaffolding

Mar 03, 2019

According to the actual use, the amount of the wheeled scaffold is also different, for example, the scaffolding of the building exterior wall. Where the masonry height from the design of the outdoor floor to the cornice is below 15m, the masonry height is calculated according to the single-shot scaffolding. For 15m or more, or the masonry height is less than 15m, but the external wall doors and windows and decorative area exceed 60% of the external wall surface area, according to the double-row scaffolding calculation.

 

If the wheeled scaffolding is used as the inner wall scaffolding of the building, the masonry degree of the design of the indoor floor to the top of the roof is below 3.6 meters. According to the calculation of the scaffolding, when the masonry height exceeds 3.6, according to the single Row scaffolding calculation; when the height of the stone wall is more than 1 meter, it is calculated according to the outer scaffold.

 

When calculating the internal and external scaffolding, the area occupied by the empty hole of the door, window opening, etc. is not deducted; when the height of the same building is different, it should be calculated according to different heights; for the scaffolding of the wall, all the outdoor natural floor to the top of the wall When the masonry height is above 3.6 meters, the scaffolding should be calculated. After the scaffolding is calculated, the wall decoration project will no longer calculate the scaffolding.

 

When the indoor ceiling decoration is designed to be more than 3.6 from the indoor floor, the scaffolding should be calculated. After the full scaffolding is calculated, the wall decoration project will no longer calculate the scaffolding; the reinforced concrete chimney for the sliding formwork construction, the simple warehouse, no additional scaffolding calculation the amount.www.eg-scaffold.com