Scaffolding refers to the various brackets that scaffolding manufacturers set up for workers to operate and solve vertical and horizontal transportation, mainly for the construction workers to work up and down or peripheral safety net maintenance and high-altitude installation components. There are many types of scaffolding, such as overhanging scaffolding and floor-standing scaffolding.
Unlike floor-standing scaffolding, which is built on the ground or floor, cantilevered scaffolding is usually overhanged from steel and scaffolding is placed on the steel. The most obvious difference between the two is mainly the difference in the roots. Under normal circumstances, floor-standing scaffolding should be used for floor framing below 20 meters, and cantilevered scaffolding should be used for more than 20 meters. In actual construction, it is often On the second or third floor, the overhanging scaffolding will begin to be built.
Floor-standing scaffolding is built directly from the ground or floor surface. The building capacity is large and the shelf is stable and not easy to be loose. It can be used not only for structural engineering construction, but also for renovation engineering construction; and after the floor rack is removed and accepted, Directly carry out construction operations such as underground outdoor wall waterproofing and room backfilling.
Floor-standing scaffolding façade scaffolding poles and floors should be paved with slabs, and the loose rock ground of scaffolding foundation must be tamped and leveled, the mortar solidified, and the site should be clean and tidy; at the same time, drainage should be organized, drainage measures should be provided, and grit chambers should be provided. Special personnel should be assigned to carry out daily safety management.http://www.eg-scaffold.com/