Scaffolding Meets Construction Needs

Sep 12, 2017
Scaffolding Meets Construction Needs

The reason why scaffolding is so popular is determined by its performance characteristics.

First of all, the use of scaffolding: indoor and outdoor decoration, store billboards, bridges, building support, Viaduct ﹑ elevated road ﹑ Culvert ﹑ Tunnel ﹑ dam construction ﹑ room inside and outside the renovation project, etc., can also be used for the erection of various performances stage, ﹑, stands, Scaffolding temporary advertising racks and so on.

Secondly, scaffold efficiency is high: flexible, rapid disassembly, without screws, achieved a multiplier efficiency. Lift, disassemble and transport and facilitate.

Third, the scaffold is economical and practical, low cost, small footprint and long use time. Scaffolding If it is well maintained, it can be reused more than 30 times.

Finally, the scaffold is safe and reliable, the joint self-locking ability is good, the series standardization. Good overall performance: with pedal plate, parallel frame, buckle wall pipe, Scaffolding horizontal and cross lever pipe, such as vertical and horizontal locking device. Reasonable BEARING force: the vertical pipe directly under pressure, the performance indicators to meet the construction needs. Good fire performance, all the main frame and accessories are steel products.

Several advantages of scaffolding:

1) Easy to install and dismantle, flexible erection. Because the length of the steel tube is easy to adjust and the fastener is easy to connect, it can be adapted to various planes, facades of buildings and structures with scaffolding.

2) The bearing capacity is larger. Scaffolding When the geometrical dimension and the construction of the scaffold conform to the requirements of the specification, the bearing capacity of the single pipe column of the scaffold is usually very large.

3) More economical. Processing is simple, Scaffolding the cost of one investment is lower; if the scaffold geometry is carefully designed and the working rate of the steel pipe is improved, the material dosage can also achieve better economic effect. The steel pipe frame of fastener is equivalent to 15 kg per square metre.