Fork Head For Prop
Application: Shoring Prop Accessories
Fork Head is a part that is inserted into the prop for connecting the plywood.
▪ The tube of the fork head is to connect the prop.
▪ The four angles of the fork head is to connect the plywood like the H20 beam.
▪ The fork head ensures stablibity of H20 because it is clipped between the angles.
▪ Suitable for both 48/56mm prop and 48/60mm props.
Weight: 3 kg
Tube : OD30×3.5×190mm
Surface treatment: electrio zinc plating.
Instructions for Use
Connect the fork head to the prop by inserting the tube into internal hole of prop until the base of the fork and the base of the prop is levelled.
To clip the H20 plywood beam between the angle of the fork head.