0.73M two board hop up side bracket for ringlock all round scaffolding system
0.73M two board hop up side bracket for ringlock all round scaffolding system is an important part for Ringlock system.
It consists of tubes and cast steel ends and wedge pins and round spigot.
▪The ledger on of this side bracket is to fit 2 pcs of 320mm wide steel plank side by side
▪ One end is to be fixed on rosette, the other end is to touch the vertical tube through the curved part.
▪ Guard rails can be made by being spigoted to the side bracket.
▪ Hot dip galvanised finishing ensure long lasting use
Weight: 0.70 kg
The spacing from the center of the vertical tube and the center of the spigot is 732mm when erected.
Made of cast steel Q235 or Q345 as requested. Main tube is ø48.3×3.2MM
Surface treatment: hot dip galvanised
Instructions for Use
Erect the cast end into the rosette of the vertical standard by punching the wedge pin.
Meanwhile, touch the slope part to touch the vertical standard firmly.
Put the steel plank on the horizontal ledger of the bracket when necessary.
East Grace Tech is one of the professional manufacturers and suppliers of high quality 0.73m two board hop up side bracket for ringlock all round scaffolding system made in China. Equipped with many highly qualified employees in our factory, we warmly welcome you to get the top quality products with high strength from us.