Floor Prop

The floor prop with an impact protector

Product Details

Floor prop

Application: Slab Formwork System

 

Product Information

Floor prop

The floor prop with an impact protector

 

Features

Floor prop

▪ long-lived, due to impact protector

▪ easy-to-turn adjusting nut, thanks to special thread geometry

▪ less physical effort needed, thanks to the prop's low weight

▪ operational safety achieved by consistently high load capacity of at least 20 (30) kN in accordance with EN 1065 – Class D/E

▪ height adjustment made easy by hole-numbering

 

Technical Information

Surface treatment: HDG (hot-dip galvanized)

Floor prop top

Description

Length

Weight[kg]

Floor prop 20 top 150

92 - 150 cm

8

Floor prop 20 top 250

148 - 250 cm

12.7

Floor prop 20 top 300

173 - 300 cm

14.3

Floor prop 20 top 350

198 - 350 cm

17.4

Floor prop 20 top 400

223 - 400 cm

21.6

Floor prop 20 top 550

298 - 550 cm

32.3


Floor prop 30 top 250

148 - 250 cm

12.8

Floor prop 30 top 300

173 - 300 cm

16.4

Floor prop 30 top 350

198 - 350 cm

20.7

Floor prop 30 top 400

223 - 400 cm

24.6

Floor prop 30 top 450

248 - 450 cm

29.1

Floor prop 30 top 550

303 - 550 cm

38.6

 

Instructions for Use

Roughly adjust the height of the floor prop, using the fastening clamp.

The holes are all numbered, which makes it easier to adjust the props to the same height.

Turn the adjusting nut until it is in contact with the fastening clamp.

When setting up the floor prop, make sure that the fastening clamp is pushed all the way into the floor prop.

Floor Prop 10

Removing the floor props

1) Hold the inner tube with one hand.

2) Open the fastening clamp to unfix the inner tube.

Guide this by hand while lowering it into the outer tube.

Floor Prop 11

Inquiry